ATR Logo

 



Photographs  and history at  Adelaide River, Northern Territory
 

Adelaide River is very fortunate that many of the original artefacts remain on site from when the North Australian Railway ran through the township. The Railway was  built  by the Government of South Australia as at that time, the Northern Territory was indeed the Northern Territory of South Australia. Adelaide River was 77 rail miles south of Darwin. The gauge of this railway was 3'6" (1067mm)

 Work started at Darwin in 1886 and the construction was carried out by the firm of C & E Millar of Melbourne. The first engine arrived at Port Darwin and was called "Sandfly" ." Sandfly" was a tiny 0-4-0 saddle tank locomotive and it was used originally to move the railway construction materials from the wharf to the stacking yard. The 42lb/yard rails came from Krupp in Germany and the pressed steel sleepers came from England. Today "Sandfly" is on display at Darwin after spending decades at Port Augusta and Adelaide.

The construction of the line continued and the first return service between Adelaide River and Darwin commenced on Monday 16 July 1888. The railway reached Pine Creek in 1889. . By this time the Pine Creek gold rush, which had been the reason for building the Palmerston-Pine Creek railway, had declined to a low level of activity.  Adelaide River is half way to Pine Creek and a Refreshment Room was established to assist passengers endure the 10 hour journey to Pine Creek at a maximum 20mph.

The entire line was taken over by the Commonwealth of Australia in 1911  (when South Australia gave the Northern Territory to the Commonwealth).  During WW1,  Lord Vestey offered to establish a meat works in Darwin if the NAR was extended to Katherine to transport the cattle.  The Pine Creek to Katherine extension was completed in 1917 and included the major bridge across the Fergusson River which has been reused for the new standard gauge railway.

A further and last extension to Daly Waters was commenced in 1926 to connect with the international air service. The line construction got as far as Birdum when work ceased during the Great Depression and was opened in September 1929. The entire line closed on 30 June 1976.  A new standard gauge railway linking Alice Springs to Darwin was  built in 2002 -3.

All the pictures are thumbnails on this page and you need to click on the picture to see a full size photograph. All Photographs were supplied  by  Trevor Horman.

 

The Historic Adelaide River Station Refreshment Building. The track in the foreground is the new standard guage line to Darwin. Note how close the new line is to the  old railway. The kitchen in the refreshment rooms has recently been fitted out with stainless steel benches refrigerators, lights, power points drink coolers and other fittings.

 

The  photograph below is an aerial view of the Refreshment Rooms taken in the Wet season. The building has been renovated and repainted in October 2005. The elevated 26,000 gallon elevated water tank stands in front of the water reservoir.

 

 

The boiler and steam powered water pump (non-operational). The track in the foreground is the Adelaide to Darwin standard gauge track. Adelaide River used to be a three road yard with SAR triple throw points. The 30psi boiler was made by James Martin at Gawler in 1888 and the reservoir was excavated with horse drawn skids.. Mick Kent is providing an interpretive guide to visitors on the Railway Picnic Day in August 2005

 
 

This photograph below shows the historic 1888 wrought iron bridge over the Adelaide River. This bridge was fabricated by James Martin of Gawler South Australia and it was erected by  Charles Millar and Co. The bridge has five 100ft spans. The plaque on the plinth was unveiled by the Chief Minister on 3 December 2004 (the anniversary of the official opening of the bridge and first train across in 1888). The plaque was erected by Engineers Australia in recognition of the significant engineering heritage of this bridge. It is still sound and is proposed for use in the 4km Adelaide River - Snake Creek Railway project. You can just see the standard gauge bridge on the right hand side of the photograph.

 

 

NSU63 has returned to the town and is residing beside the Stuart Highway at Adelaide River. It is to be repainted into Commonwealth Railways livery. This was one of a pair of Sulzer powered diesel electric locomotives which brought the steam era to a  conclusion on the NAR in 1965.

 

 

The Photograph below shows Commonwealth Railways Carriage BC329 being painted. It is to
be used as a Visitor Information Centre to allow the Refreshment Rooms to revert to original purpose.

 

 


You can always click on the locomotive to catch the train back to our main page.